Yes. If cared for correctly timber can be used in bathrooms and wet areas. Our timber finish is very durable as long as spills and water splash back are wiped down immediately. Water left on any treated timber surface for long periods of time will cause damage and need to be wiped down immediately.
Stone is the most practical choice of material for bathrooms and wet areas. However, if cared for correctly timber can be practical as well as beautiful. Consider the use of the space and how often it is cleaned and cared for.
No. We recommend only using a warm damp cloth to clean your timber products with.
We also recommend the following Care and maintenance instructions to extend the life of your handcrafted timber products.
CARE & MAINTENANCE
• Spills or moisture on timber products should be wiped off immediately
• No chemical cleaning product(s) should be used directly on timber products.
• Always use a soft damp cloth to clean down your timber products
• Products should not be installed or placed in direct sunlight
• Continuous moisture in the air may cause damage to the product. Appropriate room ventilation is
recommended.
• Our timber products are finished in a polyurethane lacquer which can protect mildly against scratches however take care when placing ceramics or heavy items on the surface. We recommend always using coasters and placemats or a protective layer between any items you wish to place on top of the product.
• Do not leave any wet items on any timber products.
• Do not put hot or cold products on the surface of timber products.
• Outdoor products have an exterior finish specific to Loughlin Furniture. We recommend yearly reapplication
of our Outdoor Finish to both freshen up and protect your product. This can be purchased in-store. Contact
our team for more information.
Yes. Loughlin Furniture offers a personal delivery service for the Central Coast, Sydney and Newcastle areas. If you live outside of these areas we can assist with 3rd party couriers. Exact costs depend on size, quantity and delivery location. Please contact our team for more information.
Yes. We offer a check measure service for orders from the Central Coast, Sydney and Newcastle areas. Get in touch for more information.
Unfortunately we cannot install your bathroom vanity and do not offer this service. However we canprovide installation instructions for your licensed builder and plumber.
Yes. Our solid timber bathroom vanities are heavy in comparison to non-solid timber vanities. We recommend that extra battening behind the tiling/wall is done in preparations for vanity installation. A licensed tradesperson will be able to assist with this. We are here to help so get in touch with our team for more information.
All our solid timber furniture is proudly designed and made on the Central Coast, NSW Australia.
Due to the nature of timber, colour and tone can change over time and must be considered. Keeping your product out of direct sunlight will help along with taking care day to day.
The spout reach should cover between 25 and 50 percent (from back to middle) of your basin. Ideally, the flow of the water will go right into the waste. Also check that your spout has a basin flow not a bath flow.
Yes. Loughlin Furniture Designs Pty Ltd offer a twelve (12) month warranty period on all Loughlin Furniture timber, metal & stone products.
Mostly, except for some dining tables which are flat packed to save on freight.
Yes. Your new bathroom vanity is delivered assembled with waste holes cut (for stone tops) and ready to be installed by a licensed builder or plumber.
Yes. We can design and build your custom piece of furniture. Contact our team for more information on this service.
Yes. We can assist you with tap-ware, basins and accessory options from our suppliers including Brodware, Sussex, Wood Melbourne, Robert Gordan, Scandilux and Slab Shapers. Please get in touch with our team for more information.
Yes. All of our products are available as custom built in any size. Please get in touch with our team for more information.
1000% not (well within reason) the specifications of the product or design will be the same however Timber, being a natural product is impossible to reproduce exactly from one piece to another. Timber gain, colour and imperfections vary in each individual piece ~ that’s the beauty of it!
Although it’s not a hard and fast rule, we suggest vanity height is between 900 & 950mm from the finished floor height to the top of whatever basin you have chosen. From the finished floor height, we suggest the middle of the tap ware should be 1050mm.
Once an order is placed online or over the phone and a deposit or full payment has been received, manufacture & production or shipment of your hand crafted product has started, therefore we can not offer a refund for change of mind purchases.
Cancellations and refunds outside of these circumstances are considered at Loughlin Furniture’s discretion. If your circumstances change please get in contact with a customer service team member as soon as possible.
Estimated weights for our products are as follows:
– 600 long, between 40-60kg
– 750 long, between 50-70kg
– 900 long, between 60-80kg
– 1200 long, between 70-90kg
– 1500 long, between 90-110kg
– 1800 long, between 120-140kg
Weights can vary as each piece of timber has different densities and can vary greatly.
These estimated weights include the weight of the stone or mirror but otherwise ‘unloaded’ (not including basins or accessories)
As houses tend to move over time, we like to know where you plan to position your vanity in your bathroom (especially if the drawers go right to the edge eg Avoca, Ashton)
If your “location in room” is up against a wall we will customise your unit to ensure functionality and easy installation.
Up against left or right wall: if your vanity is going hard against a wall make the unit with a 80mm filler strip end panel rather than full end for this side. This is so your installer can sit the unit tight into a corner and have allowances for any walls that may not be quite square. This gap is covered by the stone or timber top and siliconed off so is not visible at all.
Between 2 walls: if your vanity is going between to walls, we will make the unit with a 80mm filler strip end panel rather than full end for this side. If your vanity is sitting tight between walls, please note we recommend confirming measurements with our team once the room is tiled for a more custom fit with minimal gaps, scribing.
No walls: Your vanity will be made as pictured/no modifications required
At Loughlin Furniture, all of our timber furniture and timber vanities are handmade on the Central Coast of NSW in Australia by a team of experienced and qualified cabinetmakers and woodwork specialists. At Loughlin Furniture we use only the highest quality local and imported materials to ensure the aesthetics and longevity of our timber furniture.
